If you have USB 2.0 you will see an entry with USB2 Enhanced Controller.

look for the heading Universal Serial Bus Controllers > Click the ‘ +‘ sign to expand the menu.

select the Hardware tab > click on Device Manager.

open Windows Explorer > right-click My Computer.

You can do this via the Device Manager as follows: The first thing you should find out is if you are using the latest USB 2.0 drivers. Like all drivers, USB drivers are updated regularly and should be kept up-to-date with major changes or updates in your Operating System.

This project is licensed under GNU GPLv3, see LICENSE.txt for further information.Usually USB 2.0 means a faster connection speed and this is the major difference (generally but not always) between USB1, USB2 and USB3, with the latter providing super speeds of up to 5Gbps. Other than that the USBtinyISP just has to plugged into an USB port and connected with an standard 6 pin ISP cable to the target board! License It can be used with avrdude by including the option -c usbtiny, within the Arduino IDE Tools > Programmer: 'USBtinyISP' has to be selected. With the first DIP switch the target power distribution can be activated (ON ≙ activated, OFF ≙ deactivated), the second one selects the supply voltage (ON ≙ 5V, OFF ≙ 3.3V).The USBtinyISP runs under Windows, Linux and MacOS X, for Windows a modified LibUSB driver has to be installed. a battery powered project running at a voltage anywhere around 3.7V will be programmed with the same voltage level, this way you don't have to worry about destroying your AVR by programming it with a voltage higher than the supply voltage! How to use If power distribution is deactivated, the target AVR will be programmed with with a voltage level equal to the voltage applied by the target board to the VCC pin of the ISP. This programmer is able to power the target board with up to 300mA 3.3V or 500mA 5V, selectable via DIP switches (see How to use for further information).

The USBtinyISP is due to the usage of the ATtiny24A as main controller extremely small and low cost, it has the form factor and size of a general USB Stick and offers a standard 6 pin ISP connector. It is based on the USBtiny project by Dick Streefland and can be used as the USBtinyISP by Adafruit, therefore it works great with avrdude und AVRStudio! Features The USBtinyISP is an USB AVR ISP programmer, capable of writing and reading flash, EEPROM and fuse bits of Atmel AVRs.

Usb isp driver windows 10